What is the inseam on shorts?
The inseam is the seam that runs down the inside of each leg. On shorts, the inseam measurement is the distance from the crotch seam (where the four leg seams meet) to the bottom of the leg opening. It tells you how much leg the shorts cover.
It is not the same as the total length. The outseam runs down the outside of the leg from the top of the waistband to the hem, so it also includes the rise. Two pairs of shorts with the same 7 inch inseam can look different if one has a higher rise.
How to measure shorts inseam in 3 steps
- Lay the shorts flat. Put them on a table, front side up, and fold one leg back so you can see the inner seam. Smooth out wrinkles without stretching the fabric.
- Find the crotch point. Locate the spot where the inner leg seams meet the centre seam. This is your starting point.
- Measure to the hem. Run a soft tape measure in a straight line along the inner seam down to the very bottom edge of the leg. Read the number in inches (or centimetres) and round to the nearest quarter inch.
For shorts with a split or curved hem (common on running shorts), measure to the lowest point of the inner seam, not to the top of the split. For shorts with a built-in liner, measure the outer shell only.


Measuring your own leg instead
If you want to know which inseam suits you, measure a pair of shorts you already like using the steps above. That is the most reliable method. To measure your body, stand straight in bare feet and measure from the top of your inner thigh down to the point on your leg where you want the shorts to end. A friend makes this much easier.
Inseam lengths compared
Where an inseam ends depends on your height and leg length, but this is a good general guide for an adult of average height.
| Inseam | Where it usually ends | Typical use |
|---|---|---|
| 2–3 in (5–8 cm) | High on the thigh | Women's running shorts, racing shorts |
| 5 in (13 cm) | Mid-thigh | Running, gym, summer casual |
| 7 in (18 cm) | A few inches above the knee | Training and everyday gym shorts |
| 9 in (23 cm) | Just above the knee | Casual, chino and sweat shorts |
| 10–11 in (25–28 cm) | At or just over the knee | Basketball and some team shorts |
As a rule, taller people see a given inseam end higher on the leg, and shorter people see it end lower. If you sit between two lengths, the shorter one usually looks sharper and the longer one gives more coverage.
Common inseams by type of shorts
- Running shorts: 3–5 inches, often with a split hem and liner, for a full stride.
- Gym and training shorts: 5–7 inches, a balance of movement and coverage. See our custom gym shorts range.
- Sweat and casual shorts: 7–9 inches in fleece or French terry. See custom shorts and matching shorts sets.
- Basketball shorts: 9–11 inches or longer, for a loose, at-the-knee look.
- Soccer and rugby shorts: usually shorter, around 5–7 inches, so they don't restrict kicking and running.
- Compression shorts: often 6–9 inches, worn close to the leg under training kit.
Setting inseam for your own brand or team
If you are producing shorts rather than buying them, inseam is one of the key points of measure in your size spec. A few things help the factory get it right:
- State the inseam for your base size, then how it changes across sizes. Many brands grade inseam slightly by size; others keep one length for every size. Both work if you write it down.
- Add a tolerance, for example ±0.5 cm, so every piece in bulk can be checked against it. Our guide to what a tech pack is shows where this goes.
- Offer more than one length if your customers vary. A 5 and 7 inch option is a common pairing for gym shorts.
- Check it on the sample. At KITFORGE you get a pre-production sample before bulk, usually in 7–10 days, so you can measure the inseam and try the fit before you commit.
We make shorts in sizes 4XS–5XL, with sublimation, embroidery, screen or DTF printing, and your own labels under OEM, ODM or private label. Minimum order is typically 10–30 pieces per style, which makes it practical to test two inseam lengths. If small runs are new to you, read how to order small batches from a low MOQ manufacturer.
Make custom shorts in the length you want
Browse our fitness wear range or custom gym shorts. Send your design and size spec and we reply within 24 hours with pricing.
Frequently asked questions
What is the inseam on shorts?
The inseam is the length of the inner leg seam, measured from the crotch seam down to the bottom of the leg opening. It tells you how long the leg of the shorts is, not the overall length.
How do you measure the inseam of shorts?
Lay the shorts flat, smooth out wrinkles, and measure in a straight line along the inner leg seam from the point where the seams meet at the crotch to the bottom hem.
Is a 7 inch inseam short?
A 7 inch inseam is a mid length. On most men it ends a few inches above the knee, which is why it is a common choice for gym and training shorts. A 5 inch inseam sits higher on the thigh and a 9 inch inseam sits close to the knee.
What is the difference between inseam and outseam?
The inseam runs along the inside of the leg from the crotch to the hem. The outseam runs along the outside from the top of the waistband to the hem, so it includes the rise and is always longer.
Choosing fabric for stretch shorts? Read elastane vs spandex: is there any difference?
